Online Catalogue | Netiom Products
Items: Value:
Product Sections:
Main Pages:
Ref: Netiom-std
Quantity:
Standard Netiom with web page access, email and TCP client modes. Control of I/O does not need any special software - any browser can be used. More...Related products:
Ref: Netiom-UDP
The Netiom-UDP is designed specifically for machine to machine applications. It uses a simple UDP based protocol which provides fast response with low ethernet traffic. More...Related products:
Ref: Netiom-xAP
xAP enabled version of Netiom with web page access and email. I/O can be controlled from a web browser or from other xAP devices. More...Related products:
Ref: Netiom-Link
Two Netiom-Links work together over an ethernet connection. The outputs on one module are controlled by the inputs on the other and vice versa. More...Related products:
Ref: VO1C
The Optoisolation Input Module connects directly to the digital inputs of our range of VIOM, NETIOM and EMACSYS products. It has 8 optoisolators for systems which require a high level of isolation and noise immunity. Two versions are available, one with a common optoisolator supply rail, the other with each optoisolators supply separate. Connection to the module is via a 10 way ribbon connector (provided) which carries the eight output lines plus power.Related products:
Ref: VD1
The LED Display Module connects directly to our range of VIOM, NETIOM and EMACSYS products. It has 8 x 3mm red LEDs. Connection to the module is via a 10 way ribbon connector (provided) which carries the eight output lines plus power.As well as display functions, the module is also very useful as an installation / diagnostic aid.Related products:
Ref: VR1
The Relay Expansion Module connects directly to our range of VIOM, NETIOM and EMACSYS products. It has 8 single pole change over relays each rated at 1 amp d.c. at 24 Volts d.c. /110 Volts a.c. Connection to the module is via a 10 way ribbon connector (provided) which carries the eight output lines plus power.Related products:
Ref: Netiom-U/G
All the Netiom products share the same hardware. It is possible to switch between product variants by changing the processor which can be supplied separately.